January 27th, 2010
A pen drive is a portable USB flash memory can be used for fast transfer from one computer hard drive another.It audio, video and data files using a small PCB (printed circuit board), used to store large amounts of data and the Your data storage is based on EEPROM technology.
What is Flash?
Flash memory is a type of EEPROM. This is a memory chip, which contains no electricity supply store of information.
What is EEPROM?
EEPROM of electrically erasable programmable read-only memory means. It is a non-volatile memory in the form of electricity can be changed.
USB flash drive that contains a flash memory chip, a small plate, or installed in its chips and male-type USB interface to connect one end. The circuit board contains a microprocessor, which as a USB mass storage driver to enable the computer into a simple linear model of flash memory. The regulator control module’s operating mode to access NAND flash memory in the inner and implementation of the wear and tear, such as a balanced to ensure that the function of flash RAM chip, equal access to all blocks. This is important because there is no limit to 1: NAND flash memory, you can write, and copied to it using the same data is always the first block, these blocks will wear faster, which also useless in the area before the chip blocks that have been widely used in all cases.
PCB’s will also have an oscillator to provide the data transfer operational control of the clock signal, usually an LED, and sometimes two, you can display the flash unit active. As a warning that the device is in use, unplug the LED, without having to remove, may be unable to repair the damaged unit behavior.
Tags: flash drive memory, pen drive
Posted in
Computer, gadget, info |
No Comments »
May 10th, 2009
In todays day and age,where computer users are increasing by large numbers monthly,the website has developed as a means of self expression or as a launch point for business pursuits.
There are countless ways of learning how to make a website using such tools as the
WYSIWYG(What You See Is What You Get)HTML Editor.This is basically a point and click to create program.If you want a website fast,try it.
Good places for these are myspace.com or your internet service provider.They can provide you with a free website where you can really be creative with there (what you see is what you get editor)
HTML stands for Hyper Text Markup Language and was the standard language when the graphical user interface(GUI)was implemented
into the windows operating system.
There are other languages that can be used to make a website,such as Flash,xml,dhtml and a few others.In my opinion,the most flexible language and most easy to learn is html.
A great online source to learn html is html goodies. The online tutorials found here are second to none and range from basic to advanced.This is where I learned basic html and I recommend it to anyone who wants to learn the language.
Lets talk about the basic layout of your first page of your website.
Is this a personal website? Will it be a website showcasing products that you intend to sell?
If this is a personal website,You can start by having all your links on the left side of the page,your text content can be in the middle with images if you like.On the right side of the page can be more links and images.You will need to divide the page into 3 sections to accomplish this.It can be done with table commands or with the divison command.Please go to the html goodies site for futher explanations of these and future terms in this article for the best clarification possible.
Now,lets say you want to make a website for your small business that your starting.For example,your going to be selling computer games.
You will want people to know about your website and this entails submitting your website to the major search engines and directories,such as google,yahoo.msn,altavista and others.
Here is a great list of directories,both paid and free.
Read the rest of this entry »
Tags: deve;op-ment web, Website
Posted in
Computer, Development, web |
No Comments »
January 27th, 2009
The world is full of uncertainty and his team, too, because the data loss may occur at any time. If you’re really worried about your data security, to take the initiative to avoid the loss. In the best-known methods to prevent data loss is to perform regular backups and maintenance. You should always be careful before the disaster was not their work. Like a small error, on a laptop computer or system leak down to the ground coffee, can contribute greatly to the data loss. The hard drive click sound, frequent natural disasters, such as generated, which can cause data loss. Serious accidents have occurred frequently, regardless of us, until and unless there is something to solve this problem, as the current backups. A backup to ensure that you do not have the choice for data recovery services to restore their lost, missing or unable to access the data.
Some researchers and software engineers suggested the best way to prevent computer crashes is to keep dry, clean, safe, avoiding the damage to system equipment.
However, there are some other ways to prevent system crashes. These include:
Always have UPS (uninterruptible power supply) connected to the system. This helps to save on electricity data.
Do not use any storage media, it is obvious damage.
To prevent displacement or system components of movement in running.
Do not connect any external or removable storage media in the computer systems used or being implemented.
Please follow the steps below to make your computer systems and data security. But regardless of how much pain in order to prevent data loss, which may occur at some point in time, in this case, only one backup can help save the lost data. However, if the coffin “nails”, if the backup does not help and can not restore the data. In this case, one must use data recovery as a solution. May through reputable data recovery company data recovery services. These companies employ the expertise of highly qualified specialists, using local technology to extract or retrieve all lost or missing data on the hard disk.
Tags: Backup Data
Posted in
Computer, Tips and Trick |
No Comments »
January 9th, 2009
How to make a boot disk virus,
Purpose of this document.
This document will teach you how to get started anti-malware (virus to start) and CD / DVD – step.
Why do anti-virus startup?
In the startup environment, running on the RAM disk Windows Starter Edition (program directly loaded into the RAM), so PC hard drive as additional storage (such as flash drives processing). In this state malware (malicious software, viruses, Trojans, spyware, adware, rootkits etc.) are helpless, totally at their mercy. This is the best way to eliminate any malicious software, the success of a 100% free.
Steps:
Please follow these steps:
1. Go to http://ubcd4win.com/downloads.htm
2. Choose a mirror with a green status. (Such as “Mirror # 3″, for example)
3. Click a mirror, can take you to another place of the site will be available for download.
4. Click to start the CD limit the download link to download where it is stored to download things.
5. Once the installation program has been downloaded double-click it.
6. Select Language
7. Click Next, about 3 times, and select Install to start the file path to the final victory of CD 4. Please note that you must have at least 5.10 GB of available space for the unit to allow for future plugin growth. I would choose C: UBCD4Win. Installation should take several minutes.
8. Click Yes to check the MD5 hash. A successful installation will continue to verify the hash.
9. Click Yes to see if there is a patch file.
10. Click the check box to start ubcd4winbuilder.exe.
11. I click “Agree” button.
12. Click “No” Windows file search.
13. To obtain Windows XP operating system w/SP2.
14. To explore and copy the entire contents of CD-ROM (all folders and Windows XP CD-ROM files) anywhere on the computer. You must allocate at least 700 disks for Windows XP MB of space.
15. Open UBCD4Win (if not already open). Click the Browse button Fuente (3 points …), and then browse to the i386 folder. My path is C: WindowsXPcd as an example.
16. Then go to the media section, select the ISO image areas have to be created. This ISO can be burned with almost any burning software. Once the standard burning boot.
17. Then, click the plug-in button. Do not be too overwhelmed here, in fact, should be very happy! See all plug-ins!
18. Now is the time anti-malware software update package.
19. Let me first on my list is a square anti-spyware software. Click the OK, and then click the Configure button. Command Prompt will open and automatically start downloading the latest updates … a complete surprise, is not it!
20. So, now you need to update our plug-ins in the list of all anti-malware software program unit. Click on each one, then click Configure button.
21. Upon completion of configing and update their plug-in, clicking the Close button.
22. And then click Build.
23. Click Yes to create a directory, and then click Accept.
24. In this your ISO is created, and ready to burn points.
This concludes our tutorial on how to start the anti-virus
Tags: antivirus cd, bootable antivirus
Posted in
Computer, antivirus, info |
No Comments »
